Plastic Sprayers Manufacturer -Design Features Of Spray Plastic Bottles

The design of the spray plastic bottle is actually very simple, the basic principle is the principle of pipe pumping. The main design is in the bottle mouth, that is, one bottle head should be installed on the bottle mouth. The bottle head mainly depends on a trigger. The trigger can trigger a small water pump, and then the water pump is connected to a plastic tube. This straw can suck the contents of the bottle from the bottom of the reservoir. Of course, this can only be used for liquid or sticky. Thick emulsion. The pump then presses the liquid into a narrow cavity and ejects them from the small hole of the sprayer nozzle. The viscosity of the liquid determines the size of the nozzle and the thickness of the plastic tube.




The moving original of the hydraulic pump in the spray plastic bottle design is a piston, located in a cylindrical hydraulic chamber, and there is a small spring in the hydraulic chamber. To run the hydraulic pump, the wrench must be pulled back, so that the piston Pushed in the hydraulic chamber, the moving piston compresses the spring. When the wrench is released, the piston is pushed out of the hydraulic chamber. The two strokes of the piston into and out of the hydraulic chamber constitute a complete pump cycle.


Ningbo Ruichang Commodity Packaging Co., Ltd. is a professional Plastic Sprayers Manufacturer in China. Can be used for various containers and bottles. Plastic sprayer has high working efficiency and good spraying effect. Welcome to consult and purchase: https://www.ruichangpacking.com/product/